|Innomar SES 2000 Standard||Download|
From the wide range of SES-2000 parametric sub-bottom profilers the SES-2000 standard model is maybe the most versatile one: it is small enough to be used on small boats for inshore surveys but also powerful enough to be applicable for offshore surveys down to 500m water depth.
The high ping rate, small footprint and the possibility of transmitting sound pulses over a wide frequency range ensure sub-seafloor data with excellent resolution and very good sediment penetration. It can be used for high resolution depth of burial surveys on power umbilicals where normal cable detection methods are compromised by the turbine structure. Electronic beam stabilization will allow acquisition under bad weather conditions that would normally halt survey operations.
A user-friendly data acquisition and system control software (SESWIN) provides the possibility for network remote operation as well as remote data visualization.
The SES-2000 standard model acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the SES-2000 data.
- Lightweight and portable.
- 0.5m - 500m waterdepth.
- Parametric technology.
- 100kHz primary frequency, echosounder and bottom tracking.
- 4 , 5, 6, 8, 10 , 12 & 15kHz secondary SBP frequencies.
- Logging of SEG Y data.
- Roll stabilisation.