Survey Equipment

MAGNETOMETER CABLE (CAB 03)

Follow us
Find out more about this product Contact us

Consists of two signal pairs, two power cores, waterblock, Kevlar wraps and a PU jacket with an overall diameter of 11.4mm. It is suitable for use with Marine Magnetics Explorer or Geometrics G881 or G882 Magnetometers. This cable is stocked by GSE and is available for sale as well as rent.

Conductor: 2 x Power

  • 2.5mm² (14 Gauge) Tinned Copper Wire
  • 41/30 Stranding
  • Insulation Type: Poly Propylene (PP)
  • Wall thickness nominal .015 inches
  • Outside diameter (OD) nominal .105 inches


Conductor: 2 x Signal Pair
 

  • .50mm² (20 Gauge) Tinned Copper Wire
  • 10/30 Stranding
  • Insulation Type: Poly Propylene (PP)
  • Wall thickness nominal .010 inches
  • Outside diameter (OD) nominal .059 inches

 
Construction details:

  • Cable Pairs and Power cores around .045” Solid Poly Filler
  • Waterblock to fill interstices
  • Overall Mylar
  • Kevlar wraps – 1 left hand lay, 1 right hand lay (strength to 750kg)

 
Jacket:

  • Fluorescent Green Poly Urethane (PU)
  • Wall thickness nominal .070 inches
  • Outside diameter (OD) nominal 11.4mm (.450 inches, +\- .020 inches)