|Buckleys D43-PHD 2-40 Pipeline Test Kit||Download|
The Pipeline Test Kit is suitable for checking coating thicknesses of between 60 microns to 26mm and contains all the necessary equipment to perform tests. Additional phosphor bronze electrodes, either straight or curved, can be supplied for use with the kit. Alternatively, rolling spring electrodes can provide an effective means of testing external pipe coatings and are available in most sizes to suit. Coatings on smaller pipes (less than 100mm/4”) can be tested by using a silicone rubber electrode (with suitable size hole) through which the pipe can be passed.
Adjustable output voltage range: 2-40kV DC.
Variable sensitivity: 0-500uA.
Suitable for coating thicknesses 60µ to 26mm.
Maximum continuous current: <1Ma.
Operating time: 7 hours (average).
Meter accuracy: +/- 1%.
Mains voltage for charging: 110 to 230V AC 50/60 Hz.