Diving & Life Support

SD-DNV Series

Follow us
Find out more about this product Contact us

Description

The offshore SD-DNV series of man-rider winches are designed for general duty offshore use. Man-rider winches are classified for use where the load is used above the surface and below the surface (sub-sea). The sub-sea element is more stringent in load factors and material requirements. The winches are typically used on offshore cranes for manned baskets and for diving systems. The winch consists of a single hydraulic drive system with planetary gearbox, integral gearbox parking brake, dynamic hydraulic over-centre valve and an automatic emergency band brake. The winches are constructed from high quality Steel and painted with a Marine-Grade Primer and High-Gloss Topcoat. These winches are approved by classification societies.

Specifications:

SD-DNV 650
Length x Width x Height: ± 870 x 680 x 840mm
Weight: ± 500kg (excl. rope)
Min Lift Capability: Hydraulically set to 650kg
Max Lifting Speed: Variable up to 36m per minute
Max Drum Wire Capacity: 160m of 10mm dia. non-spin wire rope
Level Wind: None
Applications: Typically used for clump-weights on air diving baskets systems or for a man-riding basket for onshore applications. applications.

SD-DNV 1000
Length x Width x Height: ± 870 x 680 x 840mm
Weight: ± 500kg (excluding rope)
Min Lift Capability: Hydraulically set to 1000kg
Max Lifting Speed: Variable up to 18m per minute
Max Drum Wire Capacity: 80m of 13mm dia. non-spin wire rope
Level Wind: None
Applications: Used in main diver basket recovery of air diving systems or wet-bell systems. Can also be used for man-rider baskets attached to crane arms.

Order Detail:

Offshore single drive winches (SD-DNV Series) 650 SD-DNV Series D-W-461
Offshore single drive winches (SD-DNV Series) 1000 SD-DNV Series D-W-462