Diving & Life Support

HD 45, Hammer Drill

Follow us
  • HD 45, Hammer Drill
Catalogue - D-ST - Sub-sea Tooling
Find out more about this product Contact us

Description

Description:
The Stanley Hydraulic HD45 Hammer Drill is a heavy duty underwater drill designed for drilling in concrete, rock and masonry. The feathering on/off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 inch diameter hole up to 29 inch deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts.

Features:
• T-Handle with large on/off trigger for precise control
• Stainless Steel spools and fasteners
• Forward-Reverse with adjustable bit rotation speed
• Feathering on/off valve allows easy start and control
• Uses 736 Skil fluted carbide tipped drill bits - requires no water/air to clear holes
• Drills ¾" to 2" diameter holes, up to 29" deep and core drills up to 4" in diameter
• Operates in any position
• Painted hi-visibility yellow
• Trouble free drill steel latch retainer

Specifications:
Chuck Capacity: Up to 2" dia. or 4" core bit
Steel Capacity: 736 Skil hex
Circuit Type: Open Center
Flow Range: 7-9gpm / 26-34lpm
Optimum Flow: 8gpm / 30lpm
Working Pressure: 1500 - 2000psi / 105 - 140bar
Full Relief Setting: 2250psi / 155bar
Rotation Speed: 0 - 300RPM
Weight (less tool bit): 49lbs / 22.2kg
Length: 24½" / 62.2cm
Width (at handles): 14" / 35cm
Hydraulic Ports: -8 SAE O-ring
Hose Whips: Yes (3 ⁄8" NPT Male thread)

Order Detail  
HD45 - Stanley Hammer Drill OC, NO. 736 Skil Hex, D-ST-153