|Catalogue - D-ST - Sub-sea Tooling||Download|
Burning in excess of 10,000°F at the tip, these cutting rods cut or melt virtually any known material. The rod design of these welding rods features alloy core wires retained by circular crimps that prevents burn back into the torch. This makes the underwater ultrathermic cutting rods the safest on the market. Ultrathermic cutting rods can be bent 90 degrees or more to access hard to reach places without restricting oxygen flow or causing insulation to split or flake off. Ultrathermic Cutting Rods may be used with a maximum of 150 amps to assist in the burning process and have no electrical requirement. Once ignited, they continue to burn as long as oxygen is supplied or until the rod is consumed. These rods are available in 1/4 inch and 3/8 inch diameters and have a standard length of 18 inches. 36 inch Ultrathermic cutting rods are also available for heavier jobs allowing more burn time between rod changes.
|Broco Ultrathermic Cutting Rods 36" long; 3/8" diameter (66 rods per box) (3836UW-25)||D-ST-168|
|Broco Ultrathermic Cutting Rods Underwater, 3/8" Diameter, 18" Long, 11kg box (66 rods per box) (3818UW-25)||D-ST-169|
|Broco Ultrathermic Cutting Rods, 1/4", 25lb. Box. (131 rods) (1418UW-25)||D-ST-167|