Diving & Life Support

ID 07, Impact Drill/ Wrench

Follow us
  • ID 07, Impact Drill/ Wrench
ID 07, Impact Drill/ Wrench

The Stanley Underwater Hydraulic Impact Drill ID07 is two hydraulic underwater tools in one - an impact wrench and a wood drill. The ID07 has the commercial diving work-site proven swing-hammer mechanism that will deliver high performance and long-term service. The integral Stanley Hyrevz gear motor is manufactured to exacting standards to deliver maximum efficiency. The 1/2 inch square drive impact wrench delivers torque up to 500ft lbs and can tighten and loosen (and even break) nuts and bolts and drive lag screws underwater.

• Integral Stanley Hyrevz gear motor produces high torque
• Stainless Steel spools and fasteners
• Forward-reverse with variable speed
• 500ft lbs / 675Nm of impact torque
• Oversized trigger for operator comfort
• Wiper seals on reversing and trigger spool
• Built-in reverse check valve ensures long seal life
• Plastisol handle for comfortable ergonomic grip
• Forward position of handle provides better balance
• Open center/closed center-dual spool feature
• Cast-in lifting eye

Output Capacity: 1/2" square drive
Torque: 500ft. lbs (675Nm)
Input Flow Range: 4-12gpm (15-45lpm) at the commercial diver
Input Working Pressure: 750 - 2000psi (50-140bar)
Full Relief Setting: 2250psi (155bar)
Weight: 7.2lbs (3.3kg)
Length: 10.0" (25.4cm)
Width: 4.25" (10.8cm)
Height: 10" (25.4cm)

Order Detail:  
Impact Drills - Yellow Jacket, oC/CC, U/W, 1/2 in SQ. Drive, ID 07 D-ST-155


Request a Quote