The umbilical cutter is an emergency device used to sever the umbilical. It consists of a blade in a Stainless Steel housing which is actuated from within the bell by means of a hydraulic hand-pump. It is designed to easily cut through a fully pressurised umbilical fitted with a Kellems grip. All controls are mounted inside the bell. The umbilical cutter is fitted with a safety pin designed to resist an 80 bar back-pressure on the hydraulic system. This ensures that should any water or gas pressure be trapped in the hydraulic system, the umbilical will not be inadvertently cut. 108mm / 125mm Diameter cutting aperture sizes are available.
Specifications:
Temp Range: 0°C - 52°C
Max Working Pressure: 310bar
Order Detail:
Umbilical Cutter - 108mm: |
D-BE-005 |
Umbilical Cutter - 125mm: |
D-BE-006 |