The offshore T series of man-rider winches are designed for heavy duty offshore use. Man-rider winches are classified for use where the load is used above the surface and below the surface (sub-sea). The sub-sea element is more stringent in load factors and material requirements. The T-Series winches are typically used for saturation diving systems and consist of a dual hydraulic drive system, each drive capable of recovering the full load independently. Each drive includes a planetary gearbox, integral shaft-mounted, multi-disc, fail-safe brakes, and dynamic hydraulic over-centre valves. The winch is constructed from high quality Steel and painted with a Marine-Grade Primer and High-Gloss Topcoat. The winches are approved by classification societies. The winches are ABS approved.
Specifications:
6T
Length x Width x Height: ±2225 x 1350 (1600 with spooling) x 1970mm
Weight: ±3500kg (excl. rope)
Min Lift Capability: 6000kg
Max Lifting Speed: Typically up to 22.5m/min
Max Drum Wire Capacity: 700m of 24mm dia. non-spin wire rope (7 Layers)
Level Wind: Grooved Drum and Wire Spooling
Applications: Used as a guide-wire winch for saturation systems
10T
Length x Width x Height: ±2375 x 1350 (1600 with spooling) x 1995mm
Weight: ±4200kg (excluding rope)
Min Lift Capability: 10 000kg
Max Lifting Speed: Typically up to 14.5m/min
Max Drum Wire Capacity: 350m of 36mm dia. non-spin wire rope (5 Layers)
Level Wind: Grooved Drum and Wire Spooling
Applications: Used as a main bell winch
Order Detail:
Hydra Dual Drive Man-Rider Winches - Model 6T D, ABS |
D-W-466 |
HYDRA Dual Drive Man-Rider Winches Model 10T D, ABS Approved |
D-W-467 |